Overview
The BBPOS WisePOS E is a Stripe card reader that can be used to process in-person card payments through the Bravo Box Office.
Stripe no longer accepts new orders for the WisePOS E, but organizations that already have a WisePOS E can continue using their existing reader with Bravo.
This guide explains how to prepare your WisePOS E, connect it to the internet, register it with your Stripe account, and prepare it for use with Bravo.
Looking for a new card reader?
The Stripe Reader S710 is the current card reader recommended for new Bravo card reader setups. See How to: Set Up a Stripe Reader S710.
Before You Begin
Before setting up your reader, make sure you have:
- Your BBPOS WisePOS E.
- The battery supplied with the reader, if your model requires battery installation.
- The charging cable supplied with the reader.
- Access to your organization's Stripe account.
- Access to a reliable Wi-Fi connection.
- Completed your organization's Stripe account setup.
If your Stripe account has not yet been connected to Bravo, follow How to: Set Up Your Stripe Account and Connect It to Bravo
Important: Registering and setting up your WisePOS E does not automatically make it ready for use with the Bravo Box Office. Bravo Arts Solutions must also complete the required payment configuration for your organization. Bravo Support will let you know when your setup is ready for testing.

Steps
1. Install the Battery and Charge the Reader
Some WisePOS E readers require the battery to be installed before the reader is used.
If your reader has a pre-installed battery, you can skip the battery installation and proceed with charging the reader. Stripe notes that some WisePOS E readers shipped from January 2026 onward have a pre-installed battery.
If the battery needs to be installed:
- Turn the reader over so the back is facing you.
- Remove the back cover using the indentation near the bottom-left corner.
- Insert the battery into the battery compartment.
- Make sure the gold connectors on the battery are aligned correctly.
- Replace the back cover.
- Connect the supplied charging cable to the reader.
- Connect the reader to power and allow it to fully charge.
2. Turn On the Reader
Once the reader is charged:
- Locate the power button on the right side of the reader.
- Press and hold the power button until the screen turns on.
- Allow the reader to finish starting up.

Pressing the power button briefly puts the reader to sleep or wakes it.
To completely turn off the reader, press and hold the power button until the power-off option appears, then select it.
Tip: Stripe recommends leaving the WisePOS E plugged in and powered on when possible so it can receive automatic software updates.
3. Access the Reader Settings
To access the WisePOS E settings:
- Swipe from the left edge of the screen toward the right.
- Select Settings.
- Enter the admin PIN: 07139.

From the Settings menu, you can manage the reader's Wi-Fi connection, generate a pairing code, and access other device settings.
4. Connect the Reader to Wi-Fi
The WisePOS E needs an internet connection to communicate with Stripe.
To connect the reader to Wi-Fi:
- Open the reader's Settings.
- Select Wi-Fi Settings.
- Select your Wi-Fi network.
- Enter the Wi-Fi password.
- Connect to the network.
Connecting the reader to a new Wi-Fi network disconnects it from its previous wireless connection.
Note: The WisePOS E can also use a wired Ethernet connection when used with the optional WisePOS E Ethernet Dock.
5. Register the Reader with Stripe
Before the WisePOS E can be used with Bravo, it must be registered with your organization's Stripe account and assigned to a Stripe Location.
Stripe provides three ways to register a smart reader:
- Pairing Code
- Serial Number
- Order Number
Option 1: Register Using a Pairing Code | Option 2: Register Using the Serial Number | Option 3: Register Using the Order Number |
If the reader is not registered, a pairing code may automatically appear on the reader. You can also generate a pairing code from the reader's Settings menu.
| You can also register the WisePOS E using its serial number.
The serial number can be found on the reader, its box, or the associated Stripe hardware order. | If the WisePOS E was originally ordered through the organization's Stripe account, you may also be able to register it using its Stripe hardware order number.
The Order Number method only works when the reader is associated with an eligible hardware order for that Stripe account. |
Tip: Give each reader a clear name that identifies where it will be used, such as Box Office Reader or Concessions Reader.
6. Allow the Reader to Update
Once the WisePOS E is connected to the internet, leave it powered on so it can download and install any available software updates.
We recommend setting up the reader ahead of your first event to allow enough time for updates.
7. Notify Bravo Support
Once your WisePOS E has been:
- Powered on.
- Connected to the internet.
- Registered with your Stripe account.
- Assigned to the appropriate Stripe Location.
notify Bravo Support that your reader setup is complete.
If you have not already provided Bravo Arts Solutions with access to your Stripe account, follow How to: Set Up Your Stripe Account and Connect It to Bravo.
Bravo Arts Solutions will use the provided access to complete the required payment configuration for your organization.
8. Wait for Bravo to Confirm Your Payment Setup
Additional configuration must be completed by Bravo Arts Solutions before your WisePOS E can be tested through the Bravo Box Office.
Bravo Support will let you know once the required payment configuration has been completed.
Important: Please wait for confirmation from Bravo Support before attempting your first card reader transaction through the Bravo Box Office.
9. Test the Reader with Bravo
Once Bravo Support confirms that your payment setup is ready, you can test your WisePOS E through the Bravo Box Office.
Before testing, make sure:
- The reader is powered on.
- The reader is connected to the internet.
- The reader is registered with the correct Stripe account.
- The reader is assigned to the appropriate Stripe Location.
- Bravo Support has confirmed that your payment configuration is complete.
You can then perform a test Card Reader payment from the Bravo Box Office.
See How to: Process a Card Reader Payment for step-by-step instructions.
Tips & Best Practices
- Fully charge the WisePOS E before using it at an event.
- Keep the reader connected to the internet so it can receive software updates.
- Set up and test the reader before the day it will first be used.
- If you have multiple readers, give each reader a clear name in Stripe.
- Make sure each reader is assigned to the appropriate Stripe Location.
- Wait for Bravo Support to confirm that your payment configuration is ready before testing the reader through the Box Office.
FAQ
Can I still use my existing BBPOS WisePOS E?
Yes. Organizations that already have a working WisePOS E can continue using it. You do not need to replace your existing reader solely because it is no longer available for new orders.
Can I order another BBPOS WisePOS E?
Stripe no longer accepts new orders for the WisePOS E. If you need a new or additional reader, see About Card Readers for Bravo's currently recommended card reader.
Does registering my WisePOS E mean it is ready to use with Bravo?
Not yet. After the reader has been registered, Bravo Arts Solutions must complete the required payment configuration for your organization. Bravo Support will confirm when your setup is ready for testing.
Does the WisePOS E need Wi-Fi?
The WisePOS E requires an internet connection. It supports Wi-Fi, or Ethernet when used with the optional Ethernet Dock.
What if my reader does not appear when I try to process a payment?
First, make sure:
- Bravo Support has confirmed that your payment configuration is complete.
- The reader is powered on.
- The reader is connected to the internet.
- The reader is registered with the correct Stripe account.
- The reader is assigned to a Stripe Location.
If the reader still does not appear, contact Bravo Support for assistance.